Sartorius SIWABBP - Net-Total Formulation

Signum 1-2-3
Net-total Formulation Application R
75
Net-total Formulation
Application R
With this application, you can weigh in
different components up to a defined
total. Each component is saved in the
net-total memory.
Characteristics
– Weigh in up to 999 components in
series
– Net-total formulation cannot be
combined with a level 1 or level 2
application
– Current component number displayed
in the text lines (indicating the
component to be added)
– Toggle the display from “component
mode” to “additive mode” by pressing
the w key
– Component mode: Display the weight
of the component currently on the
platform (for 1 second after it is
saved; then the platform is tared)
– Additive mode: Display the weight of
all components on the platform (after
it is saved, the net weight of the last
component added is displayed briefly)
– Toggle to a second weighing platform
while weighing on the first
– Activate Info mode via the I key
– Automatic component printout when it
is saved. Configured in Setup under:
Appl: R
: 3.17.
Signum
®
3:
appl 3:
Net Tot: 3.17.
If the 3.17.2 menu item is selected, the
entire component record is printed.
If the 3.17.3 menu item is selected,
the following items are generated only
once for the first component:
blank line, date, time, ID1 through ID4,
header lines 1 and 2. For subsequent
components, each “component” item
(“Comp xx”) is followed by a blank line.
– Automatic taring of container weight.
Configured in Setup under:
Appl: R
: 3.7.
Signum
®
3:
Appl: a.tare: 3.7.
– Restore factory default settings.
Configured in Setup under:
Appl: R
: 9.1.
Signum
®
3:
Appl: def.app: 9.1.