Totalizing Application s
74
Example:
Totalizing weight values
Settings (different from the factory settings):
Setup: Application 3: Totalizing
Setup: Printout, PRTPROT 7.6
Setup: Device Parameters: Printout: Printer 1: Select “Component log:
Auto printout”, then select the menu line items of your choice PRTPROT: 7.7.
Setup: Printout: Printer 1: Select “Total data record:
Printout as per CF key,” then select the menu line items of your choice PRTPROT: 7.8.
1.) Place the first weight on the
weighing platform
Weight value is displayed
O
2.) Store first weight value in
totalizing memory
G# + 0.250 kg Component weight is printed
T + 0.000 kg automatically (configured
N + 0.250 kg component log)
n 1
The transaction counter value
is increased by one.
3.) Remove the first weight from
the weighing platform
4.) Place the second weight on
the weighing platform
Weight value is displayed
O
5.) Store second weight value in
totalizing memory
G
# + 1.346 kg Component weight is printed
T + 0.346 kg automatically (configured
N + 1.000 kg component log)
n 2
The transaction counter value
is increased to two.
W
6.) Toggle display between
individual value and total
c
7.) End totalizing.
*G + 1.346 g Configured total data record is
*N + 1.250 g printed.
n 2
-------------------
To Next Page
Loading...
