totaliz Totalizing
3.5. Minimum load for automatic taring and automatic printing
2
)
Numeric menu similar to Counting
3.6. Minimum load for initialization
Numeric menu similar to Counting
3.7. Automatic taring: first weight tared
2
)
Numeric menu similar to Counting
3.8.
Automatic start of applications when you switch on the device with most recently saved application data
2
)
Numeric menu similar to Counting
3.16. Autosave mode
3.16.1 * Off
3.16.2 On
3.17. Individual/Component printout when saved
3.17.1 Automatic printing off
3.17.2 * Individual printout of an item with the O key
3.22. Source of values for data saved automatically
3.22.1 * Application 1
3.22.2 Application 2
3.23. Saved value
3.23.1 * Net
3.23.2 Calculated
3.23.3 Net and Calculated
3.25. Tare function
2
)
3.25.1 Keypad input added to tare comparison (weight value)
3.25.2 Tare value can be overwritten
9.1. Factory settings for all application programs
2
)
9.1.1 Yes
9.1.2 * No
off
1
)
1
) Setup level for Signum
®
3 only
2
) For Signum
®
2 only
23
To Next Page
Loading...
