Sartorius SIWABBP - Page 50

Combining Application Programs
)
10) Save the character
11) Enter additional letters as
described above.
After entering the last letter,
save the input by pressing
the ) key
k
– Open the 7.4.4 ID2 name
menu item
– Repeat starting with step 8
(
12) Exit this menu level and
configure other settings as
desired, or
)
13) Press and hold to exit the
menu
Example with Signum
®
3:
Enter ID code values.
The value “123" should be entered for ID code 1.
d
1) Activate input of ID code
values.
123
2) Enter the value for ID code 1
(in this example:
123).
.
.
.
5)
Exit after ID4 using the
d key
•
•
•
50
Example with Signum
®
3:
Enter ID code names.
“Batch number" and “Customer" should be entered for ID 1
and ID 2.
e
1) Switch on the scale
)
2) While all segments are lit,
press the ) key
The first item in the Main
menu is shown: APPL
k
3) Select the setup menu item
for the ID code settings (press
k repeatedly until setup is
displayed)
)
4) Select the Setup menu
5) Select the prtprot menu
item for the ID code settings
(press k repeatedly until
prtprot is displayed)
)
6) Select level 7.
)
7) Press the ) key until 7.4.1
appears in the display.
k
– Select the 7.4.3 ID1 name
menu item (press the key
until prtprot appears in
the display)
)
8) Press the ) key to enable
alphanumeric input.
p
,
p
,
p
,
p
9) Enter the first character using
the p and k keys (in this
example: c is displayed)
Operation
Signum 1-2-3