Sartorius SIWABBP User Manual

Signum 1-2-3
Product Data Memory for Signum® 3
Configuring Printouts
82
Example:
Standard printout for data output from the Counting application
Settings (different from the factory settings):
Applications: Application 1: Counting
Then access Setup: Printout: Printer 1: “Individual: print by pressing p”
§ Select Setup: Press the k key repeatedly until setup is displayed
§ Select Config. printout: Press the ) key
§ Press the k key repeatedly until prtprot is displayed
§ Press the ) key
)
1.) Press the ) key until 7.4
appears in the display
k
2.) Press the k key until 7.6
appears in the display
)
3.) Press the ) key to display
the list of print items (active
print selection)
)
4.) Press the ) key to access
the selection list
First printout list of selection
list
)
5.) Press the ) key to apply the
displayed print items from the
selection list to the list of print
items.
Or
k
6.) Press the k key to go to
the possible print items in the
selection list.
Selection of available print
items, see setup: prtprot
pages 35–36
k
7.) Press the k key until -----
-- appears in the display
)
8.) Press the ) key to apply
the selection
k
9.) Press the k key until ref.-
gew appears in the display
)
10.) Press the ) key to apply
the selection
11.) Selecting additional printout
items: see previous steps
(
12.) To complete the selection
of print items, press the
( key until appl appears
in the display
13.) Press and hold the ) key
(2–3 sec) to switch to
weighing mode
14.) Carry out weighing and
then print
p
15.) Press the p key to print
the results
-------------------- Printout example
wRef + 0.4000 g
blank

Sartorius SIWABBP Specifications

General

Brand	Sartorius
Model	SIWABBP
Category	Scales
Language	English