Satec PM130 series Reference Guide

7
3 EXCEPTION RESPONSES
The instrument will send the following error codes in the message body in response to incorrect
host requests:
XK -
the instrument is in programming mode
XM -
invalid request type or illegal operation
XP -
invalid data address or data value, or data is not available
NOTE
When a check or framing error is detected, the instrument will not act on or respond to the
master's request.

Satec PM130 series Specifications

General

Frequency Measurement Range	45-65 Hz
Power Measurement	Active, Reactive, Apparent Power per phase and total
Communication Ports	RS-485, Ethernet, USB
Protocols Supported	Modbus RTU, Modbus TCP, DNP3
Display	LCD
Mounting	DIN rail or panel mount
Digital Inputs/Outputs	4 digital inputs, 2 relay outputs
Humidity	5-95% non-condensing