2
Every effort has been made to ensure that the material herein is complete and accurate.
However, the manufacturer is not responsible for any mistakes in printing or faulty
instructions contained in this book. Notification of any errors or misprints will be received
with appreciation.
For further information regarding a particular installation, operation or maintenance of
equipment, contact the manufacturer or your local representative or distributor.
REVISION HISTORY
A1 May 2006 Release
A2 May 2006 F/W versions 13.1.7, 14.1.7, 15.1.8, 16.1.9 or higher
Added GE EGD protocol setup
Added 16-bit BC scaling option in the DNP Options setup
A3 Apr 2007 F/W versions 13.1.11, 14.1.11 or higher
CT primary current extended to 20,000A.
A4 Nov 2007 PM172P/E, F/W version 13.1.16 or higher
Added DST start/end hour setup.
Added the current unbalance trigger.
Added 16-bit and 32-bit frozen analog inputs and Time and Date object to the Class 0
point list.
Added 3-min power demand interval.
A5 June 2008 PM172P/E, F/W versions 13.1.19 and later, 13.71.12 or higher.
Added programmable starting current.
Added instrument transformer correction.
A6 Sep 2009 F/W versions 13.2.2, 13.72.2, 14.2.2, 14.72.2 or higher.
Added TCP event notification client.
Added GPRS setup and communication counters.
Modbus is a trademark of Schneider Electric.
To Next Page
Loading...
Need help?
General
