Satel MICRA - Test Transmissions Tab

26 MICRA SATEL
CLIP-status – select this field, if an SMS message containing module status information is to
be sent in reply to the CLIP from the given telephone number (see: "Send SMS with
module status to CLIP" option, "Test transmission" tab). The field is available, if the "Send
SMS with module status to CLIP" option is disabled.
4.3.4 „TEST TRANSMISSIONS” TAB
Fig. 12. „Test transmissions” tab.
Test transmissions
The module test transmissions may be sent periodically at defined time intervals, and also
can be generated after identification of the telephone number of the calling party (CLIP
service) or after receiving a command from the GPRS-SOFT program. The test transmission
can have a form of SMS message sent to the selected telephone numbers, can be realized
with the use of CLIP service to the selected telephone numbers or can be sent in the form of
event code to the monitoring station.
Test transmission every – if the module test transmission is to be of periodical nature, you
have to program every how many days, hours and minutes it should be sent. The first test
transmission will be sent after the preset time since saving the settings in the module has
elapsed.
Note: If an extra test transmission (using the CLIP service or the GPRS-S
OFT program
command) is generated, the time before sending the periodical test transmission will
be counted from the beginning.
SMS test transmission – enter in this field the SMS message body which will be sent as the
module test transmission to the selected telephone numbers.
Note: If you have defined the time period after which the test transmission is to be sent, and
the "SMS test transmission" field remains blank, SMS messages containing
information on the module status will be sent – as test transmissions – to the selected
telephone numbers (see: "
Send SMS with module status to CLIP" option).
Write event for reporting – if this option is enabled, each test transmission will be written to
the event log. After enabling the option, you can send test transmissions to the monitoring
stations. The method of sending the event code (SMS, GPRS) depends on the rules
defined for each monitoring station in the "GSM telephone, Monitoring stations" tab. It is
necessary to define the event code to be sent.