14 VERSA SATEL
If the VERSA-MCU controller is connected to the control panel, installation of the
INT-RX-S / INT-RX expansion module and the ACU-120 / ACU-270 / ACU-100 /
ACU-250 controller in the system is impossible.
Fig. 10. Connecting the VERSA-MCU controller to the control panel.
5.5.5 Connecting ABAX wireless system controller
Fig. 11. Connecting the ACU-120 / ACU-270 controller to the control panel.
Fig. 12. Connecting the ACU-100 / ACU-250 controller to the control panel.
One ACU-120 / ACU-270 / ACU-100 / ACU-250 controller can be connected to the control
panel. The controller enables ABAX keyfobs to be assigned to the users (up to 30 keyfobs). It
also enables up to 30 ABAX wireless devices to be installed in the alarm system (the control
panel can support up to 30 wireless zones and 12 wireless outputs). If the wireless zone
number coincides with that of the wired zone (on mainboard or in expander), you can select
which zone is to be supported (see: PROGRAMMING manual). The ACU-120 / ACU-270
controller enables the VERSA-LCDM-WRL wireless keypads to be used in the system.
To Next Page
Loading...
