Satel Versa Seris - Page 7

SATEL VERSA 5
Messaging
 Event messaging to 8 phone numbers in the form of:
– 16 voice messages,
– 64 text messages.
 Sending event notifications to 8 e-mail addresses using e-mail messages [requires
ETHM-1 Plus module to be connected].
 Informing users of the VERSA Control application about events using push notifications
[requires ETHM-1 Plus module to be connected].
Remote operation using a telephone [requires INT-VG module to be connected]
 Checking the alarm system status.
 Control of the alarm system.
 Capability to define macrocommands to run a number of different functions, thus
facilitating remote control via telephone.
 Voice menu to make operation easier.
VERSA Control mobile application [requires ETHM-1 Plus module to be connected]
 Operating the alarm system from mobile devices:
– control of the alarm system,
– checking the alarm system status.
Event log
 2047 events.
Users
 30 users.
 Capability to assign to the user:
– a code,
– a proximity card (125 kHz passive transponder, which may be in the form of a card, tag,
etc.),
– keyfob.
 Authority level determining the scope of access to the system.
Timers
 4 timers to automatically:
– arm/disarm the partitions,
– control the outputs (switching the lights on/off, watering the garden, etc.).
Programming
 Local programming:
– keypad,
– computer with the DLOADX program installed, connected to the control panel RS-232
(TTL) port.
 Remote programming using a computer with DLOADX program installed, via:
– telephone network (modem),
– Ethernet network [requires ETHM-1 / ETHM-1 Plus module to be connected].
Mainboard
 RS-232 (TTL) port to allow:
– local programming by means of a computer with the DLOADX program installed