Section 6: General Specifications
Page 6-4 CG4 Series Operator Manual
MODEL NAME
CG408 DT CG412 DT CG408 TT CG412 TT
SELF-DIAGNOSIS
Cover Open Detection
Paper End Detection
Test Pr in t
Cutter error (Only available if installed)
Cover Open Detection
Paper Detection
Test Print
Ribbon end Detection
Cutter error (Only available if installed)
CHARACTER FONT CAPABILITIES
BITMAP FONTS
U 5 dots W x 9 dots H (Alphanumeric characters and symbols)
S 8 dots W x 15 dots H (Alphanumeric characters and symbols)
M 13 dots W x 20 dots H (Alphanumeric characters and symbols)
WB 18 dots W x 30 dots H (Alphanumeric characters and symbols)
WL 28 dots W x 52 dots H (Alphanumeric characters and symbols)
XU 5 dots W x 9 dots H (Alphanumeric characters and symbols)
XS 17 dots W x 17 dots H (Alphanumeric characters and symbols)
XM 24 dots W x 24 dots H (Alphanumeric characters and symbols)
XB 48 dots W x 48 dots H (Alphanumeric characters and symbols)
XL 48 dots W x 48 dots H (Alphanumeric characters and symbols)
OA Font (OCR-A)
15 dots x 22 dots
(Alphanumeric
characters and
symbols)
22 dots x 33 dots
(Alphanumeric
characters and
symbols)
15 dots x 22 dots
(Alphanumeric
characters and
symbols)
22 dots x 33 dots
(Alphanumeric
characters and
symbols)
OB Font (OCR-B)
20 dots x 24 dots
(Alphanumeric
characters and
symbols)
30 dots x 36 dots
(Alphanumeric
characters and
symbols)
20 dots x 24 dots
(Alphanumeric
characters and
symbols)
30 dots x 36 dots
(Alphanumeric
characters and
symbols)
KANJI FONTS
Supported by downloading one of the following Kanji fonts.
1) Simplified Chinese (2.6 MB)
Gothic type GB2312 (24 x 24 dot)
2) Korean (1.6 MB)
Gothic type KSX1001 (16 x 16 dot)
Mincho type KSX1001 (24 x 24 dot)
OUTLINE FONTS
Alphanumeric characters and symbols
CHARACTER CONTROL
Magnification Expansion up to 12 x in either the vertical or horizontal
Rotation 0°, 90°, 180° and 270°
To Next Page
Loading...
Need help?
General
