Printer Output
Special Notes 1. Do not use ASCII <CR> or <LF> characters (carriage return or line
feed) as line delimiters within the graphic data or the actual image
will not be printed as specified.
2. A custom graphic cannot be enlarged by the <ESC>L Character
Expansion command (Page 4-23).
3. A custom graphic is not affected by either of the Rotation
commands. Therefore, always design and locate your graphic
image to print in the appropriate orientation.
4. Use an optional Memory Card to expand the print length.
5. To store graphic images in an optional memory card, see the
Memory Card Functions section.
6. The binary format reduces the transmission time by 50%.
Section 4. Programming Reference
Page 4-449001035 Rev. ESATOCL SeriesPrinters
To Next Page
Loading...
