SATO CL408 - Status

Memory Card Function
Status
Command Structure <ESC>BJS
Example: <ESC>BJS
Placement: After the <ESC>CC Slot Select command.
Default: None
Command Function Casues the printer to print the card status.
Printer Input
<ESC>A
<ESC>CC1<ESC>BJS
<ESC>Z
Printer Output
Special Notes
1. This command requires the Memory Card option. See your SATO
representative for more information
2. The following information is provided on the status label:
Line 1: Memory size of the card in Kbytes
Line 2: The ID number assigned with the <ESC>BJF command
Line 3: Number of formats stored and bytes used
Line 4: Number of graphics stored and bytes used
Line 5: Number of PCX files and bytes used
Line 6: Number of TT fonts stored and bytes used
Line 7: Remaining free memory
Line 8: Max expandable print length using the card
Line 9: Battery check results
MEMORY CARD
Slot [ 1 ]
Section 4. Programming Reference
Page 4-969001035 Rev. ESATOCL SeriesPrinters