Memory Card Function
Slot Select
Command Structure <ESC>CCa
Example: <ESC>CC1
Placement: Immediately following the <ESC>A Start Code.
Default: Last selected Memory Card Slot.
Command Function Selects the card slot to be used for following Memory Card
commands.
Printer Input
<ESC>A
<ESC>CC1
{commands}
<ESC>Z
Printer Output There is no printer output as a result of this command.
Special Notes 1. This command requires the Memory Card option. See your SATO
representative for more information.
CL408 CL412 CL608 CL612
a 1 = Slot 1
2 = Slot 2
1 = Slot A
2 = Slot B
Section 4. Programming Reference
SATOCL Series Printers9001035 Rev. EPage 4-95
To Next Page
Loading...
