REAR PANEL CL408 and CL412
Power: Switch to turn power On or Off.
AC Input: Input 115V 50/60 Hz connector. Use the cable
provided.
AC Fuse: Input power protection. Type 3A/250V.
Interface Slot: Slot to plug in an interface adapter. An adapter must
be connected before the printer is operational.The
adapter types available are:
RS232C serial port, DB-25P.
Centronics parallel port, AMP 57-40360.
Memory Card Slot: Two slots for optional PCMCIA Memory Cards.
EXT: External signal connector for Accessories, AMP
57-60140.
PCMCIA Memory
Expansion slots
AC Power Input
Connector
External Accesory
Connector
Power Switch
I/F Module
Centronics Shown
Cover Plate
Remove for access to
Fan-Fold Slots
AC Fuse
Section 2. Installation and Configuration
SATOCL Series Printers9001035 Rev. EPage 2-17
To Next Page
Loading...
