Character Expansion
Command Structure <ESC>Laabb
aa = Multiple to expand horizontally (01-12)
bb = Multiple to expand vertically (01-12)
Example: <ESC>L0305
Placement: Preceding the data to be expanded
Default: <ESC>L0101
Command Function To expand characters independently in both the horizontal and
vertical directions. The command allows you to enlarge the base size
of each font (except the vector font) up to 12 times in either direction.
Expanded characters are typically used for added emphasis or for
long distance readability.
Input to Printer
<ESC>A
<ESC>A<ESC>H0100<ESC>V0100<ESC>XMCL408
<ESC>H0100<ESC>V0200<ESC>L0402<ESC>XMCL408
<ESC>H0100<ESC>V0300<ESC>L0204<ESC>XMCL408
<ESC>Q1<ESC>Z
Printer Output
Section 4. Programming Reference
SATOCL Series Printers9001035 Rev. EPage 4-23
To Next Page
Loading...
