SECTION 2.
INSTALLATION AND CONFIGURATION
INTRODUCTION
This section is provided to assist you in taking the CL Series Printer from the shipping
container to the application environment. Where the physical differences between the
printer models are significant (such as loading paper and ribbons), separate sections
for each of the models are used for clarity.
The following information is provided in this section:
• Unpacking and Parts Identification
• Setting Up the Printer
• Loading Labels or Tags
• Loading the Ribbon
• Operator Panel
• Printer Configuration
SATOCL Series Printers9001035 Rev. EPage 2-1
To Next Page
Loading...
