Printer Output
Special Notes 1. When printing the custom character using the Recall command, the
character is affected by the following commands:
Character Expansion (see Page 4-23)
Character Pitch (see Page 4-26)
Line Feed (see Page 4-50)
Rotate, Base Reference Point Fixed (see Page 4-68)
Rotate, Moving Base Reference Point (see Page 4-70)
2. The characters are stored in volatile memory and must be reloaded
if the printer power is lost.
3. Do not use ASCII <CR> or <LF> characters (carriage return or line
feed) as line delimiters within the graphic data or the actual image
will not be printed as specified.
Section 4. Programming Reference
Page 4-229001035 Rev. ESATOCL SeriesPrinters
To Next Page
Loading...
