SATO CL408 - Page 194

BDabbcccd Bar Codes. Prints a 2:5 ratio bar code, except for UPC, EAN, Code
93, Code 128 and UCC128 symbols, which are fixed width bar codes.
For values a, bb, ccc and d see instructions for Babbcccd.
For UPC/EAN bar codes, this command puts descender bars and
humand readable text below the symbol.
Page 4-11
BKaabbcdd
eeefffnn...n
PDF417. Prints PDF417 2-D symbols.
aa = Minimum module dimension (03-09 dots). Will not print
for values of 01, 02 or ≥ 10.
bb = Minimum module pitch dimension (04-240 dots). Will not
print for values of 01, 02, 03 or greater than 25.
c = Security level (1-8).
dd = Code words per line (01-30). If 00 is specified for dd
and ee, printer
will automatically optimize settings.
ee = Rows/symbol (00 or 03). If 00 is specified for dd
and ee, printer will
automatically optimize settings.
fff = Number of characters to be encoded (0001-2700)
nn...n = Data to be printed.
Page 4-104
BPn...n Postnet. Prints Postnet bar codes.
n...n = 5 digit ZIP (Postnet-32 format)
6 digits (Postnet-37 format)
9 digit ZIP+4 (Postnet -52 format)
11 digit ZIP+4+DPC (Postnet-62, Delivery Point format)
.
Page 4-53
BTabbccddee Bar Codes. Variable Ratio. provides the ability to print a bar code with
a ratio other than those specified through the standard bar code
commands (B, BD, and D).
a = Bar code option:
0 Codabar
1 Code 39
2 Interleaved 2 of 5
5 Industrial 2 of 5
6 Matrix 2 of 5
bb = Narrow space in dots (01-99)
cc = Wide space in dots (01-99)
dd = Narrow bar in dots (01-99)
ee = Wide bar in dots (01-99)
Page 4-17
BVa,b,c,
ddddddddd,
eee,f f f,gg..g
Maxicode. Prints 2-D Maxicode symbols per AIM I.S.S. specification.
a = Position of symbol within the set
b = Total number of symbols in the set
c = Mode
dd..d = 9 digit numeric Postal Code
eee = 3 digit numeric Country Code
f f f = 3 digit numeric Service Class
gg..g = Data, terminated by <ESC>
Page 4-103
INSTRUCTION DESCRIPTION PAGE
Appendix A: Command Quick Reference
Page A-29001035 Rev. ESATOCL SeriesPrinters