SATO CL408 - Page 202

Memory Card Option Commands
BJ(aa..abb..b Start TrueType Font Storage. Prepares the Memory Card to accept
TrueType font data.
aa...a = 40 byte font description
bb...b = 10 byte date field
Page 4-84
BJDcccccdddd
ee...e
Download TrueType Font Data. Downloads the TrueType font data
to the memory area specified.
ccccc = Memory Offset (hexadecimal)
dddd = Data size in bytes (max = 2000)
ee...e = Font data to be downloaded
Page 4-84
BJ) End TrueType Font Storage.Ends the TrueType font storage process Page 4-84
BJFaaaaaaaa Initialize Memory. Card. Initializes the Memory Card and formats it for
use. Should be preceded by the Slot Select command for the card to
be initialized.
aaaaaaaa = 8 character alphanumeric password
Page 4-92
BJRabbccdd
eefffgg..g
TrueType Font Recall. Recalls a previously stored TrueType font for
use. Retained for compatibility with older printers. Replaced with BJT
a = Font ID (1-9
bb = Horizontal Expansion (01-12)
cc = Vertical Expansion (01-12)
dd = Character pitch (01-99)
ee = Reserved, always 00
f f f f = Number of characters
gg...g = Data to be printed using font
Page 4-83
BJTaa,bb,cc,
dd,ee,fff,gg..g
TrueType Font Recall. Recalls a previously stored TrueType font for
use.
aa = Font ID (01-99
bb = Horizontal Expansion (01-12)
cc = Vertical Expansion (01-12)
dd = Reserved, always 00
ee = Character pitch (01-99)
f f f f = Number of characters
gg...g = Data to be printed using font
Page 4-83
BJS Memory Card Status
. Reports the status of the currently active
Memory Card to the host by printing a status label.
Page 4-94
CCa Slot Select. Selects the Memory Card slot for all following Memory
Card commands.
a = 1 Slot A for CL608/612 or Slot 1 for CL408/412
b = 2 Slot B for CL608/612 or Slot 2 for CL408/412
Page 4-93
INSTRUCTION DESCRIPTION PAGE
Appendix A: Command Quick Reference
Page A-109001035 Rev. ESATOCL SeriesPrinters