Special Notes 1. This command is affected by the <ESC>L Character Expansion
command (see Page 4-23). The character pitch is actually the
product of the current horizontal expansion multiple and the
designated pitch value.
Example:
<ESC>L0304
<ESC>P03
Pitch = (03) x (03) = 9 dots
2. To avoid confusion, you may want to include the <ESC>L
Character Expansion command and this command together in
your program.
3. This command affects fonts U, S, M, XU, XS, XM, OA & OB (see
Page 4-34, fonts WB, WL, XB and XL (see Page 4-38), and the
vector font (see Page 4-36).
4. Character Pitch will always revert to the default value unless it is
specified before each new font command in the data stream.
5. This command also affects Codabar, Code 39 and Industrial
2 of 5 bar codes.
Section 4. Programming Reference
SATOCL Series Printers9001035 Rev. EPage 4-27
To Next Page
Loading...
