SATO CL408e - Page 105

Page 6-5
Section 6. Replacement Procedures
SATO CL408e/CL412e Service Manual
PN 9001078
Rev. A
Replacing the Main Circuit Board
REMOVE (2) SCREWS
REMOVE SCREW
FLASH MEMORY
MODULE
MEMORY MODULE PCB IN THE
MAIN PCB MEMORY FRAME
* CAREFULLY PRESS OUTWARD
ON TABS ON BOTH ENDS OF THE
FRAME TO RELEASE THE MEMORY
PCB.
INDEXING NOTCHES
*
*
PRESS OUTWARD
PRESS OUTWARD
Fig. 6-4
Figs. 6-5