Page 5-6
Section 5. Mechanical Adjustments
SATO CL408e/CL412e Service Manual
PN 9001078
Rev. A
5.4 Tear Plate Adjustment
STEP PROCEDURE
1. Loosen the Tear Plate mounting screws and position plate so that the lip is
parallel to the bottom of the printer assembly. Figs. 5-5
2. Tighten the mounting screws.
LIP TO BE PARALLEL
WITH BOTTOM
SURFACE
MOUNTING SCREWS
Required Equipment: #2 Pozidrv Screwdriver
Figs. 5-5
LIP
To Next Page
Loading...
