Page 2-39
Section 2. Configuration
SATO CL408e/CL412e Service Manual
PN 9001078
Rev. A
LCD Panel —Firmware Download Mode
STEP PROCEDURE
1. Record all current dip switch positions, then place all switches in the OFF
position.
2. Place the DSW2-6 in the ON or up position.
3. Turn ON the power switch. The following screens will appear.
initializing
rom v00.00.00.00
flash download
ready
Refer to the specific instructions provided with the flash firmware
files provided by SATO America Technical Support or downloaded
from the SATO America Web Site.
www.satoamerica.com
To Next Page
Loading...
