SATO CL408e - Page 179

Page 9-25
Section 9. Optional Accessories
SATO CL408e/CL412e Service Manual
PN 9001078
Rev. A
Flash Memory Expansion Installation
Figs. 9-40
INDEXING NOTCH
NO NOTCH ON THIS SIDE
FLASH MEMORY MODULE
INSERT THE FLASH MEMORY
MODULE INTO THE MAIN PCB
MEMORY FRAME AT
APPROXIMATELY 45
0
. NOTE THE
INDEXING NOTCH ON THE
MODULE. GENTLY PUSH DOWN TO
SNAP INTO POSITION
INDEXING NOTCHES
APPROXIMATELY
45
0
ANGLE