SATO CL412e - Page 115

Fonts WB, WL, XB & XL
Command Structure Font WB: <ESC>WBa Font XB: <ESC>XBa
Font WL: <ESC>WLa Font XL: <ESC>XLa
a = 0 Disables auto-smoothing of font
1 Enables auto-smoothing of font (see notes below)
Example: <ESC>WB1123456
Placement: Preceding the data to be printed
Default: None
Command Function To print text images on a label. These are the four auto-smoothing
fonts available on the printer.
NON-PROPORTIONAL PROPORTIONAL
(1)
WB 18W x 30H dot matrix XB 48W x 48H dot matrix
WL 28W x 52H dot matrix XL 48W x 48H dot matrix
(1) These fonts will be printed with proportional spacing only if preceded by an
<ESC>PS command.
Input to Printer: <ESC>A<ESC>PS
<ESC>H0001<ESC>V0100<ESC> WB0SATO
<ESC>H0001<ESC>V0185<ESC> WB1SATO
<ESC>H0001<ESC>V0270<ESC> WL0SATO
<ESC>H0001<ESC>V0355<ESC> WL1SATO
<ESC>H0300<ESC>V0100<ESC> XB0SATO
<ESC>H0300<ESC>V0185<ESC> XB1SATO
<ESC>H0300<ESC>V0270<ESC> XL0SATO
<ESC>H0300<ESC>V0355<ESC> XL1SATO
<ESC>Q1<ESC>Z
Printer Output:
SATO CL Series “e” Printers PN 9001074 Preliminary Page 5-41
Section 5. Programming Reference