APPENDIX A.
COMMAND CODE QUICK REFERENCE
A Start Code. Begins all print jobs.
Page 5-
A1aaaabbbb Media Size. Specifies the label size.
aaaa = Label Width in dots (0 to Vmax)
bbbb = Label Length in dots (0 to Hmax)
Page 5-
A(space)Z Form Feed. Feeds a blank tag or label. Page 5-
AR Normal Print Length. This command resets the printer to the
Standard print length (7 inches).
Page 5-
A3H-aaaa
-Vbbbb
Base Reference Point. Establishes a new base reference point
position in dots for the current label. Units of measurement are dots.
- = Optional character. If included, will shift reference point in
negative direction.
Page 5-
CL408e CL412e CL608e CL612e
aaaa = Horizontal Print Offset +/- 896 +/- 1248 +/- 1216 +/- 1984
bbbb = Vertical Print Offset 0001 to 1424 0001 to 2136 0001 to 1424 0001 to 2136
Babbcccd Bar Codes. Prints a 1:3 ratio bar code.
a= 0 Codabar
1 Code 39
2 Interleaved 2 of 5 (I 2/5)
3 UPC-A/EAN-13
4 EAN-8
5 Industrial 2 of 5
6 Matrix 2 of 5
7 reserved
8 reserved
9 reserved
A MSI
B reserved
C Code 93
D reserved
E UPC-E
F Bookland
G Code 128
I UCC 128
bb = Number of dots (01-12) for narrow bar and narrow space
ccc = Bar height in dots (001-600)
d = UCC 128 only
0 No human readable text
1 Human readable at top
2 Human readable at bottom
Page 5-
SATO CL Series “e” Printers PN 9001074 Preliminary Page A-1
INSTRUCTION DESCRIPTION PAGE
To Next Page
Loading...
