Characters, Custom-Designed
Command Structure Store Command: <ESC>Tabcc
Recall Command: <ESC>Kab90cc
a = 1 16x16 matrix
2 24x24 matrix
b = Specifies the character encoding method
H Hexadecimal characters
B Binary characters
cc = Memory location to store/recall the character. Valid
memory locations are 21
H
to 52
H
or “!” to “R” in Binary
(data) = Data to describe the character
Example: <ESC>T1H3F
<ESC>K1H903F
See Appendix C for a more detailed explanation
Placement: The Store command is sent in its own data stream
to the printer, between the Start/Stop commands.
The Recall command is sent in a secondary data
stream to print the character,and follows any necessary
position or size commands.
Default: None
Command Function To allow for the creation, storage, and printing of custom characters,
such as special fonts or logos. Up to 50 individual characters may be
stored in the custom character volatile memory.
Printer Input See Appendix C for a detailed explanation.
<ESC>A
<ESC>
T1H3F
0100038007C00FE01FF03FF87FFCFFFE07C007C007
C007C007C007C007C007C0
<ESC>Z
<ESC>A
<ESC>H150<ESC>V100<ESC>L0505<ESC>
K1H903F
<ESC>H350<ESC>V100<ESC>L1010<E SC>
K1H903F
<ESC>Q1<ESC>Z
SATO CL Series “e” Printers PN 9001074 Preliminary Page 5-21
Section 5. Programming Reference
To Next Page
Loading...
