Print Position
Command Structure Horizontal Position: <ESC>Haaaa
Vertical Position: <ESC>Vbbbb
aaaa = Number of dots horizontally from the base reference point
(1 to maximum) See Note 2.
bbbb = Number of dots vertically from the base reference point
(1 to maximum) See Note 2.
Example: <ESC>H0020<ESC>V0150
Placement: Preceding any printed field description of lines/boxes,
fonts, bar codes or graphics.
Default: <ESC>H0001
<ESC>V0001
Command Function The Horizontal and Vertical commands specify the top left corner of a
field or label, using the current base reference point as an origin. They
also establish a reference point for subsequent fields until the next
horizontal and/or vertical print position command is issued.
Input to Printer
<ESC>A
<ESC
>H0025<ESC>V0050
<ESC>L0303<ESC>MSATO
<ESC>
H0100<ESC>V0150
<ESC>MSATO
<ESC>Q2<ESC>Z
Printer Output
Page 5-64 PN 9001074 Preliminary SATO CL Series “e” Printers
Section 5. Programming Reference
To Next Page
Loading...
