Bar Codes, Expansion
Command Structure <ESC>BWaabbb
aa = Expansion factor by which the width of all bars and spaces
will be increased (01-12)
bbb = Bar height by dot (004-600 dots)
Example: <ESC>BW02100
Placement: Immediately follows the <ESC>BT command and
precedes data to be encoded.
Default: None
Command Function This command works together with the <ESC>BT command to specify
an expansion factor and the bar code height for the particular symbol
being printed.
Input to Printer:
<ESC>A
<ESC>H0050<ESC>V0050<ESC>BT101030103
<ESC>
BW04100*1234*
<ESC>Q1<ESC>Z
Printer Output:
Special Notes 1. This command must be preceded by the Variable Ratio Bar Codes
<ESC>BT command.
2. The following bar codes will be affected by the Character Pitch
command: Codabar, Code 39, Interleaved 2 of 5, Matrix 2 of 5.
Page 5-16 PN 9001074 Preliminary SATO CL Series “e” Printers
Section 5. Programming Reference
To Next Page
Loading...
