SATO CL412e - Table of Contents

TABLE OF CONTENTS
SECTION 1. PRINTER OVERVIEW
Introduction ..............................1-
General Printer Specifications .....................1-
Character Fonts ............................1-
Bar Codes ...............................1-
Physical ................................1-
Optional Accessories .........................1-
SECTION 2. INSTALLATION AND CONFIGURATION
Introduction ..............................2-
Unpacking and Parts Identification ..................2-
Setting Up the Printer .........................2-
Loading Labels, Tags and Ribbon in the CL608 and CL612 ......2-
Loading Labels, Tags and Ribbon in the CL408 and CL412 ......2-
Operator Panel ............................2-
CL608 and CL612 .........................2-
CL408 and CL412 .........................2-
Rear Panel...............................2-
CL608 and CL612 .........................2-
CL408 and CL412 .........................2-
Switches and Sensors .........................2-
CL608 and CL612 .........................2-
CL408 and CL412 .........................2-
SECTION 3. CONFIGURATION
Printer DIP Switch Configuration ...................3-
Default Settings ............................3-
Potentiometer Adjustments ......................3-
LCD Panel Printer Configuration ...................3-
Normal Mode ...........................3-
Advanced Mode ..........................3-
Card Mode.............................3-
Service Mode ...........................3-
Counter Mode ...........................3-
Test Print Mode ..........................3-
Default Setting mode .......................3-
SATO CL “e” Series Printers PN 9001074 Preliminary Page - iii
Preface