SATO CL412e - Journal Print

Gabbbccc(data) Custom Graphics. Allows the creation and printing of graphic images
using a dot-addressable matrix.
a = Specifies format of data stream to follow
B Binary
H Hexadecimal
bbb = Number of horizontal8x8blocks
ccc = Number of vertical8x8blocks
data = Data to describe the graphic image
Page 5-
GMaaaaa BMP File. Downloads BMP file to the internal graphics image memory.
aa..a = No. of bytes to be downloaded (max DOS file size = 32K
Page 5-
GPaaaaa PCX File. Downloads PCX file to the internal graphics image memory.
aa..a = No. of bytes to be downloaded (max DOS file size = 32K)
Page 5-
Haaaa Horizontal Position. Specifies a field’s horizontal location across the
width of the label from the current base reference point. The units of
measurement are dots.
Page 5-
CL408e CL412e CL608e CL612e
aaaa = New Horizontal Position 0001 to 0832 0001 to 1248 0001 to 1216 0001 to 1984
IDaa Store Job ID. Stores the Job ID number.
aa = Job ID number assigned (01-99)
Page 5-
J Journal Print. Provides the ability to print text line by line. Fixed
spacing between lines and characters.
Page 5-
Kab90cc Recall Custom Designed Characters. Recalls for printing a custom
character stored by the Tabcc(data) command.
a = 1 16 x 16 matrix
2 24 x 24 matrix
b = Indicates the format that data stream was stored in
B Binary
H Hexadecimal
bb = Memory location where the character was stored.
Valid locations are 21 to 52 or “!” to “R” in hex values.
Page 5-
Laabb Character Expansion. Expands characters in both directions.
aa = Multiple to expand horizontally (01-12)
bb = Multiple to expand vertically (01-12)
Page 5-
M Font type. Specifies the 13W x 20H dot matrix font (including
descenders).
Page 5-
OA Font type. Specifies the OCR-A font with dot matrix. Page 5-
CL408e CL412e CL608e CL612e
OA Font Matrix 15W x 22H 22W x 33H 15W x 22H 22W x 33H
Appendix A: Command Quick Reference
SATO CL Series “e” Printers PN 9001074 Preliminary Page A-5
INSTRUCTION DESCRIPTION PAGE