SATO CL412e - Page 234

OB Font type. Specifies the OCR-B font dot matrix. Page 5-
CL408e CL412e CL608e CL612e
OB Font Matrix 20 W x 24H 30W x 36H 20 W x 24H 30W x 36H
Paa Character Pitch. Designates the number of dots between characters.
aa = Number of dots between characters (01-99)
Page 5-
PR Fixed Font Spacing. Returns the printer to fixed character spacing
mode.
Page 5-
PS Proportional Font Spacing. Places the printer in the proportional
character spacing mode. Will not work with U Font.
Page 5-
Qaaaaaa Print Quantity. Specifies the total number of labels to print.
aaaaaa = Total number of labels to print for the job
(000001-999999)
Page 5-
RDabb,ccc,
ddd,nn...n
Font Type. Specifies the internal AGFA raster fonts.
a = A Specifies CG Times font
B Specifies CG Triumvirate font
bb = 00 Specifies Normal
01 Specifies Bold
ccc = Horizontal Size (16 to 999 dots or P08 to P72 point size)
ddd = Vertical Size (16 to 999 dots or P08 to P72 point size)
nn..n = Data to be printed
Paghe 5-
RMaaaa,bbbb Mirror Image. Prints mirror image of data.
aaaa = Horizontal position of the top left corner of image area to
be mirrored.
bbbb Vertical position of the top left corner of image area to be
mirrored.
Page 5-
S Font type. Specifies the 8W x 15H dot matrix font (including
descenders).
Page 5-
Tabcc(data) Store Custom Designed Characters. To create and store custom
characters or images in the printer’s volatile memory. See Kab90cc to
recall the character for printing.
a = 1 16 x 16 matrix
2 24 x 24 matrix
b = Specifies data stream format to follow
B Binary
H Hexadecimal
cc = Memory location to store the character.
Valid locations are 21 to 52 or “!” to “R” in hex values.
(data)= Data to describe the character.
Page 5-
U Font type. Specifies a 5W x 9L dot matrix font (including descenders). Page 5-
Appendix A: Command Quick Reference
Page A-6 PN 9001074 Preliminary SATO CL Series “e” Printers
INSTRUCTION DESCRIPTION PAGE