SATO CL412e - Graphics, Custom Recall

Expanded Memory Function
Graphics, Custom Recall
Command Structure <ESC>GRaaa
aaa = Graphics storage number (001-999)
Example: <ESC>GR111
Placement: The Recall command is sent in a secondary data
stream to print the graphic, and follows any necessary
position or size commands.
Default: None
Command Function Use the Recall command any time you want to print a graphic image
on a label along with other printed data.
Printer Input
Non Rotated Graphic Graphic Rotated 90°
<ESC>A<ESC>CC1 <ESC>A<ESC>CC1<ESC>%1
<ESC>V0100<ESC>H0080<ESC>L0505 <ESC>V0180<ESC>H0250<ESC>L0505
<ESC> GR001 <ESC> GR001
<ESC>Q1<ESC>Z <ESC>Q1<ESC>Z
Graphic Rotated 180° Graphic Rotated 270°
<ESC>A<ESC>CC1<ESC>%2 <ESC>A<ESC>CC1<ESC>%3
<ESC>V0180<ESC>H0500<ESC>L0505 <ESC>V0100<ESC>H0700<ESC>L0505
<ESC> GR001 <ESC> GR001
<ESC>Q1<ESC>Z <ESC>Q1<ESC>Z
Printer Output
Special Notes 1. The graphic image to be stored cannot be rotated before it is
stored. It can be rotated when it is recalled.
2. Graphic images cannot be stored as part of a label format.
3. See the <ESC>GI Custom Graphic Store command.
Page 5-94 PN 9001074 Preliminary SATO CL Series “e” Printers
Section 5. Programming Reference