Repeat Label
Command Structure <ESC>C
Example: See above
Placement: Must be placed immediately after <ESC>A and
immediately before <ESC>Z in its own separate
data stream
Default: None
Command Function To print duplicate of the last label printed
Input to Printer
<ESC>A
<ESC>
C
<ESC>Z
Printer Output A duplicate of the previous label will be printed.
Special Notes 1. This command will have no effect if the power to the printer was
cycled off and back on since printing the previous label.
Page 5-68 PN 9001074 Preliminary SATO CL Series “e” Printers
Section 5. Programming Reference
To Next Page
Loading...
