SATO CL412e - Vbbbb

Vbbbb Vertical Position. Specifies a field’s vertical location down the length
of the label from the current base reference point. Units of
measurement are dots.
Page 5-
CL408e CL412e CL608e CL612e
bbbb = Vert Position
Expanded
0001 to 1424
0001 to 9999
0001 to 2136
0001 to 9999
0001 to 1424
0001 to 9999
0001 to 2136
0001 to 9999
WBa Font type. Specifies the 18W x 30L dot matrix font (including
descenders).
a = 0 Disables auto-smoothing of font
1 Enables auto-smoothing if expansion is greater than 3
Page 5-
WDHaaaaVbbbb
XccccYdddd
Copy Image Area. To copy an image to another location of the label.
aaaa = Horizontal position of the top left corner of image area
bbbb = Vertical position of the top left corner of image area
cccc = Horizontal length of image area
dddd = Vertical length of image area
Page 5-
WKnn...n Job Name. Stores the job name.
nn..n = Job name, up to 16 ASCII characters
Page 5-
WLa Font type. Specifies the 28W x 52L dot matrix font (including
decenders).
a = 0 Disables auto-smoothing of font
1 Enables auto-smoothing if expansion is greater than 3
Page 5-
XM Font type. Specifies the 24W x 24H dot matrix font (including
descenders).
Page 5-
XS Font type. Specifies the 17W x 17H dot matrix font (including
descenders).
Page 5-
XU Font type. Specifies the 5W x 9L dot matrix font (including
descenders).
Page 5-
XWa Font type. Specifies the 48W x 48L dot matrix font (including
descenders).
a = 0 Disables auto-smoothing of font
1 Enables auto-smoothing if expansion is greater than 3
Page 5-
XBa Font type. Specifies the 48W x 48L dot matrix font (including
descenders).
a = 0 Disables auto-smoothing of font
1 Enables auto-smoothing if expansion is greater than 3
Page 5-
Z Stop Code. Ends all print jobs. Page 5-
Appendix A: Command Quick Reference
SATO CL Series “e” Printers PN 9001074 Preliminary Page A-7
INSTRUCTION DESCRIPTION PAGE