Expanded Memory Function
Clear Expanded Memory
Command Structure <ESC>*a,bbb
a = Memory card section to be cleared
G To clear SATO graphic files from memory card
P To clear PCX graphic files
F To clear formats from the memory card
O To clear TrueType fonts
bbb = Memory Card storage area to be cleared
001 to 999 for Graphics, PCX or Formats
000 to 099 for TrueType fonts
Example: <ESC>*G,01
Placement: This command should be sent to the printer
immediately following the <ESC>CC Memory Area
Select command.
Default: None
Command Function To clear individual memory areas in the Expanded Memory.
Input to Printer
<ESC>A
<ESC>CC1<ESC>
*O,09
<ESC>Z
Printer Output There is no printer output as a result of this command.
Special Notes 1. To clear everything in the Expanded Memory, use the <ESC>BJF
Expanded Memory Initialize command.
2. This command is ignored if there is no data to be cleared.
3. This command is ignored if Expanded Memory is not installed in
the printer.
Page 5-86 PN 9001074 Preliminary SATO CL Series “e” Printers
Section 5. Programming Reference
To Next Page
Loading...
