SATO CL412e - Page 232

Faaaabcccc
ddee
Sequential Numbering. Allows the printing of sequencing fields (text,
bar codes) where all incrementing is done within the printer.
aaaa = Number of times to repeat the same data (0001-9999)
b = Plus or minus symbol (+ for increments; - for decrements)
cccc = Value of step for sequence (001-9999)
dd = No. of digits for sequential numbering (01-99, default = 8)
ee = No. of digits free from sequential numbering (01-99,
default = 0)
Page 5-
FWaaHbbbb Horizontal Line. Prints a horizontal line. Units of measurement are
dots.
Page 5-
CL408e CL412e CL608e CL612e
aa = Width of Hor Line 01 to 99
bbbb = Length of Hor Line 0001 to 0832 0001 to 1248 0001 to 1216 0001 to 1984
FWaabbVccc
Hdddd
Box. Prints a box. For values aa, bbbb, cc, and dddd, see instructions
for horizontal and vertical lines. Units of measurement are dots.
Page 5-
CL408e CL412e CL608e CL612e
aa = Width of Hor Side 01 to 99
bb = Width of Vert Side 01 to 99
cccc = Length of Vert Side
Expanded
0001 to 1424
0001 to 9999
0001 to 2136
0001 to 9999
0001 to 1424
0001 to 9999
0001 to 2136
0001 to 9999
dddd = Length of Hor Side 0001 to 0832 0001 to 1248 0001 to 1216 0001 to 1984
FWccVddd Vertical Line. Prints a vertical line. Units of measurement are dots. Page 5-
CL408e CL412e CL608e CL612e
cc = Width of Vert Line 01 to 99
dddd = Length of Vert Line
Expanded
0001 to 1424
0001 to 9999
0001 to 2136
0001 to 9999
0001 to 1424
0001 to 9999
0001 to 2136
0001 to 9999
FXaaabccc
dddeee
Data Matrix. Sequential Numbering. Prints sequential numbered Data
Matrix 2-D symbols.
aaa = Number of duplicate labels (001-999)
b = Increment or decrement
+ Increment
- Decrement
ccc = Increment/decrement steps (001-999)
ddd = Sequential numbering start position (001-999). Referenced
to left side.
eee = Incremented data length (001-999). Measured from start
position.
Page 5-
Appendix A: Command Quick Reference
Page A-4 PN 9001074 Preliminary SATO CL Series “e” Printers
INSTRUCTION DESCRIPTION PAGE