SawStop 10” Professional Cabinet Saw 53
Using Your Saw
Using Your Saw
Using a Fence
You must install a rip fence prior to making rip cuts with the saw.
The SawStop
®
T-Glide
TM
Professional Series II Fence System is specifi cally designed for the Professional
Cabinet Saw (see Fig. 73). The fence is constructed from heavy-duty steel tubing for maximum rigidity and
includes high-quality, non-conductive face plates that maintain their fl atness over time. The system also
includes steel front and rear rails, a steel clamp tube, and SawStop’s proprietary design that makes the fence
glide smoothly along the rail. This fence system is available in either a 36 or 52 inch version.
You can learn more about these SawStop
®
fence systems from an authorized SawStop distributor or at
www.sawstop.com.
Fig. 73
The SawStop
®
Premium Fence Assembly
is a lighter duty fence system designed
for the Professional Cabinet Saw model
PCS175 (see Fig. 74). This fence system
includes a T-style aluminum extrusion
fence with non-conductive face plates. It
also includes heavy duty steel front and
rear rails, a steel clamp tube, and dual
cursors that allow the fence to be used
on either side of the blade. This fence
system has a 30 inch rip capacity.
Fig. 74
To Next Page
Loading...
