SawStop 10” Professional Cabinet Saw 59
Using Your Saw
Using Your Saw
Using an Out-Feed Table
You should use an out-feed table to support your work when cutting pieces longer than approximately
4 feet. The out-feed table attaches fl ush against the back edge of your saw and prevents your workpiece from
dropping off the back of your saw during cutting.
The SawStop
®
Out-Feed Table is designed for use with both the T-Glide
TM
Professional Series II Fence System
(see Fig. 84) and the Premium Fence Assembly (see Fig. 74 on page 53).
You can learn more about the SawStop
®
Out-Feed Table from an authorized SawStop distributor or at
www.sawstop.com.
Fig. 84
To Next Page
Loading...
