SawStop 10” Professional Cabinet Saw 91
Overall saw dimensions:
44” w x
29
3
⁄
4
” d x
34” h (table saw only)
61
3
⁄
4
” w x
31
1
⁄
8
” d x
34” h (w/ Premium Fence System & 30” rails)
69
1
⁄
8
” w x
33” d x
34” h (w/ T-Glide Fence System & 36” rails)
85
1
⁄
4
” w x
33” d
x
34” h (w/ T-Glide Fence System & 52” rails)
Cabinet footprint:
19
3
⁄
8
” w x 19
3
⁄
8
” d
Cast iron table:
20” w x 27” d, 44” w x 27” d (w/ extension wings)
Extension wing:
12” w x 27” d
Extension table (optional):
12” w x 27” d (30” rails), 23
3
⁄
4
” w x 27” d (36” rails),
40
1
⁄
8
” w x 27” d (52” rails)
Weights (approx.):
317 lb (table saw with extension wings only)
367 lb (w/ 30” Premium Fence System, 30” rails & table)
408 lb (w/ T-Glide Professional Series II Fence System,
36” rails & table)
431 lb (w/ T-Glide Professional Series II Fence System,
52” rails & table)
35 lb (cast iron extension wing)
Shipping weight (approx.):
381 lb
(boxed table saw)
Blade: 40-tooth, professional grade,
5
⁄
8
” arbor
Blade diameter: 10”
Blade tilt: Left
Blade kerf: 0.118” (3 mm)
Blade plate thickness: 0.078” (2 mm)
Max. depth of cut, blade at 0º: 3
1
⁄
8
”
Max. depth of cut, blade at 45º: 2
1
⁄
4
”
Max. rip, right of blade: 30” (w/ optional 30” rails)
36” (w/ optional 36” rails)
52” (w/ optional 52” rails)
Max. rip, left of blade:
12” (w/ the optional 30”, 36” or 52” rails)
Dado diameter: 8” (requires a separate brake cartridge and table insert)
Dado max. width:
13
⁄
16
”
Arbor diameter at blade:
5
⁄
8
”
Main bearing size:
62 mm OD x 30 mm ID
Second bearing size:
52 mm OD x 25 mm ID
Table in front of blade (max. elevation):
10
1
⁄
4
”
Table behind blade (max. elevation):
7
1
⁄
2
”
Arbor runout:
0.001” maximum allowable runout
Table fl atness measured diagonally:
0.010” maximum gap
Overall table and extension wing fl atness: 0.025” Maximum gap
Blade alignment with miter slot:
0.010” maximum displacement
Deviation of miter gauge indexing stops
from actual angle:
±0.25º
Alignment between spreader and blade:
0.010” maximum difference
Miter slots:
T-shaped,
3
⁄
4
” at top, 1” at bottom,
3
⁄
8
” deep
Cabinet dust collection port diameter: 4”
Riving knife / spreader thickness: 0.090” (2.3 mm)
Blade guard: polycarbonate, extends only 1” to right of blade
Standard Insert:
zero-clearance, phenolic core, melamine surfaces
Belts:
2 V-ribbed belts— arbor belt is static dissipative
Handwheels:
7” diameter, cast iron chrome plated
Motor options: 1.75hp
Professional Cabinet Saw Specifi cations
To Next Page
Loading...
