SawStop 10” Professional Cabinet Saw 55
Using Your Saw
Using Your Saw
When using a push stick to feed your workpiece toward the blade, it can be diffi cult to maintain the position
of the workpiece fl ush against the side of the rip fence. In these situations, use a featherboard to hold the
workpiece against the fence (see page 97 for making a featherboard). Clamp the featherboard to the top of
the table against the side of the workpiece opposite the rip fence to hold the workpiece fl ush against the fence
(see Fig. 76).
When not in use, the push stick should be stored on the blade wrench holder (see Fig. 77). During periods of
use, the push stick can be placed on top of the Professional Series II fence where it is more easily accessible
(see Fig. 78).
clamp
featherboard
to table
push stick
should be
stored here
Fig. 76
push stick can be
placed here
Fig. 77 Fig. 78
To Next Page
Loading...
