10. LCD Error Message
LCD Error Messages
Display Meaning
FRONT COVER OPEN Front Cover is opened
REAR COVER OPEN Rear Cover is opened
MAIN MOTOR Main Motor stopped.
CLEAR HOPPER Notes exist in the Hopper.
CHECK REJECTOR Notes exist in the Rejecter
CHECK STACKER Notes exist in the Stacker
FEEDING Miss-feeding Error
JAM0 Jam Error near RP1 sensor
JAM1 Jam Error near RP2 sensor
JAM2 Jam Error near JP sensor
JAM3 Jam Error near SP sensor
Notes: Please refer to the figures on “Chapter 9” to see the position of the sensors.
Fixing Problems
FRONT COVER OPEN / REAR COVER OPEN
1. Press Front/Rear Cover until it clicks in place.
2. Press CLEAR.
CLEAR HOPPER
1. Remove the banknotes on the Hopper.
2. Press CLEAR.
FEEDING, JAM0, JAM1, JAM2, and JAM3*
1. Remove banknotes on the Hopper.
2. Press CLEAR.
*) Attention :
In occurrence of JAM3, it is recommended that a user open the front cover and check the
inside of the machine then remove notes in person before pressing CLEAR key.
To Next Page
Loading...
