STEP 3 Select the BOOT program
1. Now move to DowmMode in the Top Menu bar.
2. Clicking it is followed by a pop-up window where programs are selectable.
3. Select the ‘SBM L_BOOT and then click ‘FILE’ in the Top Menu bar ‘OPEN’ of the full-
down menus.
4. Another pop-up window ‘OPEN’ shows up.
5. Select the ‘Boot_xxxxxx(x is a numeral) on the ‘OPEN’, which is provided by SBM
Comm. → SETUP
To Next Page
Loading...
