For Scania to guarantee that the engine corre-
sponds to its certified configuration, and take re-
sponsibility for any damage and injuries that
occur, maintenance must be carried out in ac-
cordance with the instructions in this Operator's
manual.
An emissions certified engine fulfils the emis-
sions requirements for a particular range of ap-
plication.
On each emissions certified engine there is a la-
bel which shows which requirements the engine
fulfils. Scania guarantees that each such engine
fulfils the emissions requirements for the range
of application for which it is certified.
The following are required for the certified en-
gine to fulfil the emissions requirements once it
has been taken into service:
• Maintenance is to be carried out in accord-
ance with the instructions in this Operator's
manual.
• Maintenance and repairs of injection equip-
ment are to be carried out by an authorised
Scania workshop.
• The engine may only be modified with equip-
ment that has been approved by Scania.
• Seals may be broken and setting data edited
only once approval has been granted by Sca-
nia. Modifications may be made by author-
ised personnel only.
• Modifications affecting the exhaust and in-
take systems must be approved by Scania.
Otherwise, the instructions in the Operator's
manual for the running and maintenance of the
engine shall apply. Follow the safety precautions
on the previous pages.
To Next Page
Loading...
