Scania DI13 series User Manual

OPM 250 en-GB 57
©
Scania CV AB 2016, Sweden
Miscellaneous
3.
Check drive belt wear. Renew the drive belt
if it is too worn. See the illustrations.
Checking for leaks
IMPORTANT!
If serious leakage occurs, contact your nearest
Scania workshop.
1. Start the engine.
2. Check for leaks in the lubrication, coolant,
fuel, intake or exhaust system.
3. Tighten or renew leaking connections.
Check the overflow holes which show
whether the O-rings between the cylinder
liners and crankcase are leaking.
112 931
The drive belt is starting to become worn, but can be
refitted.
112 932
The belt is worn down to the cord. The drive belt
must be renewed.

Scania DI13 series Specifications

General

Cooling System	Liquid-cooled
Displacement	12.7 liters
Aspiration	Turbocharged
Aftertreatment	SCR (Selective Catalytic Reduction)
Engine Type	Inline 6-cylinder
Fuel System	Common rail direct injection