Scania DI13 series User Manual

OPM 250 en-GB 72
©
Scania CV AB 2016, Sweden
Technical data
Cooling system
Intake system
Electrical system
Coolant volume, excluding radiator (dm
3
/US gallons)
With heat exchanger 40/10.6
With keel cooling, 1 coolant circuit 24/6.3
With keel cooling, 2 coolant circuits 20/5.3
Without heat exchanger and liquid-cooled charge air cooler 20/5.3
Coolant temperature (°C/°F)
With heat exchanger 90-95/194-203
With keel cooling 83-88/181-190
Without heat exchanger and liquid-cooled charge air cooler 83-88/181-190
Number of thermostats 1
Thermostat opening temperature (°C/°F)
With heat exchanger 80/176 and 87/187
With keel cooling 75/167
Without heat exchanger and liquid-cooled charge air cooler 75/167
Permissible pressure drop in the intake system with cleaned or new filter
(mbar)
30
Permissible pressure drop in the intake system with blocked (dirty) filter
(mbar)
65
Type 2-pin, 24 V, DC
Starter motor, standard equipment 2-pin, 24 V, 7.0 kW
Alternator, standard equipment 2-pin, 28 V, 100 A

Scania DI13 series Specifications

General

Cooling System	Liquid-cooled
Displacement	12.7 liters
Aspiration	Turbocharged
Aftertreatment	SCR (Selective Catalytic Reduction)
Engine Type	Inline 6-cylinder
Fuel System	Common rail direct injection