Scania DI13 series User Manual

OPM 250 en-GB 24
©
Scania CV AB 2016, Sweden
Lubrication system
Oil grade labels
When changing oil it is important to use the cor-
rect engine oil grade.
The oil filler cap must therefore be clearly
marked with a label for the oil grade that is re-
quired. If the label is missing or if the engine oil
grade is changed, a new label must be fitted.
Parts
Oil grade Colour Part No. Part No.
Label for cylinder block Label for rocker cover
Scania LDF-2 Blue 2 132 424 2 296 064
Scania LDF-3 Red 2 132 426 2 296 066
Scania LDF Grey 2 269 345 2 296 071
ACEA E7 White 2 132 425 2 296 065
Scania Low Ash Green 2 132 427 2 296 067
Scania Bioethanol Black 2 132 428 2 296 068
Scania BEO-2 Orange 2 258 841 2 296 070
ACEA E9 - 2 132 429 2 296 069
336 492
Filling label in the cylinder block.
353 114
Filling label in the rocker cover.

Scania DI13 series Specifications

General

Cooling System	Liquid-cooled
Displacement	12.7 liters
Aspiration	Turbocharged
Aftertreatment	SCR (Selective Catalytic Reduction)
Engine Type	Inline 6-cylinder
Fuel System	Common rail direct injection