Scania DI13 series User Manual

OPM 250 en-GB 51
©
Scania CV AB 2016, Sweden
Fuel system
Renewing the fuel filter
Environment
Use a suitable container. Used fuel must be dis-
posed of as specified in national and internation-
al laws and regulations.
1. Clean the exterior of the filter with a damp
cloth.
2. Unscrew the filter.
3. Apply oil to the gasket on the new filter.
4. Screw the filter into place by hand until it
makes contact.
5. Screw a further half turn by hand.
6. Bleed the fuel system according to the in-
structions in the section Bleeding the fuel
system using a hand pumpor Bleeding the
fuel system using a suction tool.
325 167

Scania DI13 series Specifications

General

Cooling System	Liquid-cooled
Displacement	12.7 liters
Aspiration	Turbocharged
Aftertreatment	SCR (Selective Catalytic Reduction)
Engine Type	Inline 6-cylinder
Fuel System	Common rail direct injection