Scania DI13 series User Manual

OPM 250 en-GB 58
©
Scania CV AB 2016, Sweden
Miscellaneous
Checking and adjusting the
valve clearance
WARNING!
Block the starting device. If the engine starts un-
expectedly, there is a serious risk of injury.
Special tools
Tools
Number Designation Illustration
99 309 Turning tool for rotating the flywheel from below.
99 109 Turning tool for rotating the flywheel from above.
99 442 Setting tool.
Designation Illustration
Torque screwdriver.
142 238
312 733
13 8 7 73
341 423

Scania DI13 series Specifications

General

Cooling System	Liquid-cooled
Displacement	12.7 liters
Aspiration	Turbocharged
Aftertreatment	SCR (Selective Catalytic Reduction)
Engine Type	Inline 6-cylinder
Fuel System	Common rail direct injection